Centrifugal Solids Handling Chemical Pumps
AMT Solids Handling Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial, and General Service applications including circulation, chemical processing, liquid transfer, and cooling. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handle solids up to 3/8″ diameter depending on the model. Pumps are closely coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.
• Cast Iron Construction
• EPDM/EPR Mechanical Seal and O-Rings
• Discharge Port Rotates in 45° Increments
• Solids Handling, Clog Resistant Impeller
• 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors
• 3/4˝ to 2˝ NPT Sizes
• Maximum Working Pressure 125 PSI
• Maximum Flow 180 GPM
• Maximum Head 95 Ft. (41 PSI)
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• Multiple 1/2˝ NPT Drain Ports
• Cast Iron Construction
• EPDM/EPR Mechanical Seal and O-Rings
• Discharge Port Rotates in 45° Increments
• Solids Handling, Clog Resistant Impeller
• 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors
• 3/4˝ to 2˝ NPT Sizes
• Maximum Working Pressure 125 PSI
• Maximum Flow 180 GPM
• Maximum Head 95 Ft. (41 PSI)
• Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
• Multiple 1/2˝ NPT Drain Ports
